The Storm Lighting Enclosure was conceived with all fixed-position ellipsoidal projectors in mind. It can be mounted in almost any position and provides basic protection from the elements.
The Storm Lighting Enclosure was conceived with all fixed-position ellipsoidal projectors in mind. It can be mounted in almost any position and provides basic protection from the elements. The sturdy fiberglass body is topped with has a 10" projection window on its front cap, which is easily removed to access the luminaire and its shutters or focus adjustments. It also allows the use of most types of accessories (gobos, gel frames, scrollers, gobo rotators, check for details on what will fit) with any standard leko. This front cap is held securely in place by three draw latches. The rear cap of the unit is also held by three latches and easily removes for access to the lamp compartment of the luminaire.
As with our other products, it is designed for long-term and permanent installations in exterior environments where minimum maintenance is required. But it can also be used in indoor environments where conditions may be detrimental to moving lights (dust, smoke, high humidity, contact with moving bodies or objects). While the enclosure body provides basic protection for elements, the interior contains a forced-air cooling system that draws its power from the luminaire's supply. However, the power draw is so insignificant as not to affect the output of the luminaire.
In the end, this complete protection system will reduce maintenance, increase lamp life, extend fixture life, and save you money in your outdoor use of projector-type luminaires. The Storm is offered in two models, the 5000 (Architectural) and 5100 (Economy). Although functionally equivalent, they are slightly different in external appearance. The Architectural version has a curved yoke, black rubber draw latches, and an automotive enamel finish (pictured on left). The Economy version has a simple straight yoke, rotary butterfly latches, and is only finished with a gelcoat to protect the fiberglass.
Also, use of the Storm with 5° and 10° units requires the ordering of the unit with a special front cap (forecasted availability - TBA).
Specifications
Enclosure: Non-corrosive fiberglass composite body
Coated steel and aluminum structure and hardware
10" optically clear glass window
Mounting: External - Coated steel yoke
Internal - Custom yoke bracket system
Positioning:
Finish: Model 5000
Automotive enamel
Three standard colors available (light beige, white, gray)
Model 5100
Natural white fiberglass gelcoat
Cooling: Forced air cooling provided by 100CFM fan
Filter: Washable open-cell foam filter on intake
Electrical: Connections made in internal electrical box
Enclosure Hardwired on-site
Receives power from luminaire supply
Requires maximum 25W
115VAC 50/60Hz or 220/230VAC 50/60Hz
Luminaire Power Tail provided inside enclosure
110-240VAC 50/60Hz, 10A Max, 1000W Max
Specified by luminaire manufacturer
Lab Approvals: CE
ETL & cETL listed to U.L. Standard 508 - Pending
NEMA Type 3R (similar to IP rating of 54) - Pending
IP Rated x4W - Pending Click here to download a cut sheet
